9235 Waterproofing Membrane is “The Industry Standard” for wet areas and continuous water submersion applications.

Request Product Information

Features & Benefits

Safe — no solvents and non-flammable
Interior and exterior use
Vertical and horizontal surfaces (including ceilings)
Thin—only 0.02" (0.5 mm) thick when cured
Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
“Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test).
IAPMO and ICC Approval
Applies quickly with a paint brush or roller—no special mixing or application equipment needed
Fast cure—normally ready in hours for finishes
Install tile, brick and stone directly onto membrane
Certified Children and Schools by The GREENGUARD Environmental Institute
Easy cleanup—just use water while fresh
Protects concrete & reinforcing steel from corrosion

Product Information

9235 Waterproofing Membrane is a thin, load-bearing waterproofing designed specifically for the special requirements of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing membrane that bonds to a wide variety of substrates.

Product #: 9235-0001-X
Packaging Sizes:
- Full Unit: (36 Full Units/pallet) consisting of:
  - 1 x 6 gal (23 L) pail liquid
  - 1 x 300 ft2 (28 m2) roll fabric 38" (965 mm wide)
  - 1 x 75 ft (23 m) long roll fabric 6" (150 mm wide)
- Mini Unit:
  - 1 x 2 gal (7.6 L) jug liquid
  - 2 x 6" x 75' (15 cm x 23 m) roll fabric
Part of System: LATICRETE®
Country Availability