SEAL™ is an economical yet functional clear polyaspartic concrete sealer coating system. The application consists of 2 coats of polyaspartic coatings over properly prepared concrete to a CSP 2-3. SEAL™ allows floor owners to easily achieve a wet concrete look, enhancing the colors of the underlying concrete substrate.
Compare SEAL™ Systems
|System Variation||Surface Preparation||Number of Coats||Overall Thickness||System Build
||CSP 2||2-3||250-500 μm||Top Coats: Clear PU
||For decorative concrete requiring above average chemical and abrasion resistance.
||2-3||250-500 μm||Top Coats: Clear PA||For decorative concrete requiring above average chemical and abrasion resistance and very fast turn around.|
|SEAL™ PA PURE
Top Coats: Clear PA Pure
|Green-friendly with minimal odor and 0-VOCs. Ideal for indoor applications.
Features & Benefits
- UV stable
- Gloss, Satin or Matte Finish
- Stain resistant
- Superior durability over acrylic or epoxy based concrete sealers
- Optimal substrate adhesion
- Available in a standard as well as minimal odor/VOC-Free version
- May incorporate floor traction additives for optimal slip resistance
|Cured System Properties||Seal™|
|Coefficient of Friction (ASTM C-1028)||dry: 0.98 wet: 0.83|
|Hardness (ASTM D 2240)||94|
|Abrasion Resistance (ASTM D-4060 mg loss)||22-28|
|Tensile Strength (ASTM D-638,D-2370 psi)||4500-5000|
|Substrate Adhesion (ASTM D-4541, psi)||400-500+, concrete fracture|
|Flammability (ASTM D-635)||self extinguishing|